Industrial Safety >> OSHA

« back to courses page
OSHA General classes

Please click on the course title to see the full course description.

If you have questions, please provide us with the course title and number when e-mailing or calling.

 

 
This course covers the identification, evaluation, prevention and control of fall hazards in the construction industry. The course focuses on falls to a lower level rather than falls to the same level resulting from slips and falls. Course topics include identifying, analyzing, and preventing fall hazards utilizing OSHA Fall Protection Standards. At the conclusion of the course, students will have an awareness level of identifying fall hazards and methods to control and abate the hazards. Course sponsored by Mountain West OSHA Educational Center with TrainND serving as a host training organization. Register with Mountain West Education Center at http://medicine.utah.edu/rmcoeh/continuing-education/course-schedule.php Cancellation & Refund Policy: This class requires a minimum of three students. Class will be cancelled one week prior to class start date if minimum has not been met. Please note: A student may cancel or transfer registration at least one (1) business day prior to class start, unless otherwise stated for a specific class. After this time a processing fee equal to 10% of the class cost will be incurred. Eligible refunds will be issued through the same method that payment was made. Payments made by cash will have eligible refunds issued by check. Standard check processing make take up to 3 weeks.  No refunds or transfers will be issued if TrainND is notified after class start.

Start date: 07/12/17

End date: 07/12/17

Weekly - Wed 8:00 AM - 4:30 PM (7/12/2017-7/12/2017)

Days of the Week : Weekly - Wed .

Location : Workforce Training Centre-TrainND NW Location : 
  Workforce Training Centre-TrainND NW.

Room :  Not Assigned

Tuition: $295.00

20 Seats Left

Call 701-572-2835 to register


View Details »
This course provides an introduction to basic accident investigation procedures and describes basic root cause techniques. The goal of this introductory class is to help you gain the basic skills necessary to conduct an effective accident investigation at their workplace.  Register with Mountain West Educational Center at http://medicine.utah.edu/rmcoeh/continuing-education/course-schedule.php Cancellation & Refund Policy: This class requires a minimum of three students. Class will be cancelled one week prior to class start date if minimum has not been met. Please note: A student may cancel or transfer registration at least one (1) business day prior to class start, unless otherwise stated for a specific class. After this time a processing fee equal to 10% of the class cost will be incurred. Eligible refunds will be issued through the same method that payment was made. Payments made by cash will have eligible refunds issued by check. Standard check processing make take up to 3 weeks.  No refunds or transfers will be issued if TrainND is notified after class start.  

Start date: 07/13/17

End date: 07/13/17

Weekly - Thu 8:00 AM - 4:30 PM (7/13/2017-7/13/2017)

Days of the Week : Weekly - Thu .

Location : Workforce Training Centre-TrainND NW Location : 
  Workforce Training Centre-TrainND NW.

Room :  Not Assigned

Tuition: $295.00

20 Seats Left

Please read: *This course is part of the Certificate of ...More

Call 435-725-7111 to register


View Details »
This course covers the roles and responsibilities of the employer to educate and assign a competent person to excavation sites. Course topics include understanding and application of definitions relating to the OSHA Excavation Standard, excavation hazards and control measures, soil analysis techniques, protective system requirements and emergency response. Upon course completion, students will understand the importance and duties of a competent person in excavation work and have the knowledge and skills required performing these duties. Course sponsored by Mountain West OSHA Educational Center with TrainND serving as a host training organization. Register with Mountain West Education Center at http://medicine.utah.edu/rmcoeh/continuing-education/course-schedule.php Cancellation & Refund Policy: This class requires a minimum of three students. Class will be cancelled one week prior to class start date if minimum has not been met. Please note: A student may cancel or transfer registration at least one (1) business day prior to class start, unless otherwise stated for a specific class. After this time a processing fee equal to 10% of the class cost will be incurred. Eligible refunds will be issued through the same method that payment was made. Payments made by cash will have eligible refunds issued by check. Standard check processing make take up to 3 weeks.  No refunds or transfers will be issued if TrainND is notified after class start.

Start date: 07/14/17

End date: 07/14/17

Weekly - Fri 8:00 AM - 4:30 PM (7/14/2017-7/14/2017)

Days of the Week : Weekly - Fri .

Location : Workforce Training Centre-TrainND NW Location : 
  Workforce Training Centre-TrainND NW.

Room :  Not Assigned

Tuition: $295.00

20 Seats Left

Call 701-572-2835 to register


View Details »
This course covers OSHA Standards, policies, and procedures in the construction industry. Topics include scope and application of the OSHA Construction Standards, construction safety and health principles, and special emphasis on those areas in construction which are most hazardous. Upon course completion students will have the ability to define construction terms found in the OSHA Construction Standards, identify hazards which occur in the construction industry, locate and determine appropriate OSHA Construction Standards, policies, and procedures, and describe the use of the OSHA Construction Standards and regulations to supplement an ongoing safety and health program. Course sponsored by Mountain West OSHA Education Center with TrainND serving as a host organization. Register with Mountain West Education Center at http://medicine.utah.edu/rmcoeh/continuing-education/course-schedule.php Cancellation & Refund Policy: This class requires a minimum of three students. Class will be cancelled one week prior to class start date if minimum has not been met.     Please note: A student may cancel or transfer registration at least one (1) business day prior to class start, unless otherwise stated for a specific class. After this time a processing fee equal to 10% of the class cost will be incurred. Eligible refunds will be issued through the same method that payment was made. Payments made by cash will have eligible refunds issued by check. Standard check processing make take up to 3 weeks.  No refunds or transfers will be issued if TrainND is notified after class start.

Start date: 07/17/17

End date: 07/20/17

Weekly - Mon, Tue, Wed, Thu 8:00 AM - 4:30 PM (7/17/2017-7/20/2017)

Days of the Week : Weekly - Mon, Tue, Wed, Thu .

Location : Workforce Training Centre-TrainND NW Location : 
  Workforce Training Centre-TrainND NW.

Room :  Not Assigned

Tuition: $795.00

15 Seats Left

Call 701-572-2835 to register


View Details »
Training is designed to familiarize workers with OSHA standards and educate them on how to recognize, avoid, abate, and prevent safety and health hazards in the workplace. Topics include: an Introduction to OSHA Standards, walking and working surfaces, fall protection, PPE, exit routes, emergency action plans, fire protection, and more. Course duration for OSHA 10-Hour General Industry is 10.5 hours, courses run 1pm-5pm day one and 9am-4:30pm day two. Students may choose to receive a H2S/Respiratory Protection Awareness certification by attending an additional hour of training between 8am-9am on day two of the course.   Please note: A student may cancel or transfer registration at least one (1) business day prior to class start, unless otherwise stated for a specific class. After this time a processing fee equal to 10% of the class cost will be incurred. Eligible refunds will be issued through the same method that payment was made. Payments made by cash will have eligible refunds issued by check. Standard check processing make take up to 3 weeks.  No refunds or transfers will be issued if TrainND is notified after class start.

Start date: 07/26/17

End date: 07/27/17

Weekly - Wed 8:00 AM - 4:30 PM (7/26/2017-7/26/2017); Weekly - Thu 8:00 AM - 12:00 PM (7/27/2017-7/27/2017)

Days of the Week :Multiple Days of the Week :
  Weekly - Wed .  
  Weekly - Thu .  

Location : Workforce Training Centre-TrainND NW Location : 
  Workforce Training Centre-TrainND NW.

Room :  Not Assigned

Tuition: $250.00

38 Seats Left



View Details »
This course covers OSHA Electrical Standards and the hazards associated with electrical installations and equipment. Course topics include single- and three-phase systems, cord- and plug-connected and fixed equipment, grounding, ground fault circuit interrupters, and safety-related work practices. Emphasis is placed on electrical hazard recognition and OSHA Standards, policies, and procedures and applicable portions of the National Electrical Code (NEC). Students will participate in workshops on the safe and correct use of electrical testing equipment. Upon course completion students will have the ability to understand the severity of electrical current on the human body, recognize and evaluate actual and potential electrical hazards and reference the applicable OSHA Standard, determine hazard abatement measures, and understand the proper use of electrical testing equipment. Course sponsored by Mountain West OSHA Educational Center with TrainND serving as a host training organization. Register with Mountain West Education Center at http://medicine.utah.edu/rmcoeh/continuing-education/course-schedule.php Cancellation & Refund Policy: This class requires a minimum of three students. Class will be cancelled one week prior to class start date if minimum has not been met.     Please note: A student may cancel or transfer registration at least one (1) business day prior to class start, unless otherwise stated for a specific class. After this time a processing fee equal to 10% of the class cost will be incurred. Eligible refunds will be issued through the same method that payment was made. Payments made by cash will have eligible refunds issued by check. Standard check processing make take up to 3 weeks.  No refunds or transfers will be issued if TrainND is notified after class start.

Start date: 08/08/17

End date: 08/11/17

Weekly - Tue, Wed, Thu, Fri 8:00 AM - 4:30 PM (8/8/2017-8/11/2017)

Days of the Week : Weekly - Tue, Wed, Thu, Fri .

Location : Workforce Training Centre-TrainND NW Location : 
  Workforce Training Centre-TrainND NW.

Room :  Not Assigned

Tuition: $795.00

15 Seats Left

Call 701-572-2835 to register


View Details »
This course covers the requirements for operation of cranes in the construction industry using the OSHA construction Cranes and Derricks Standard as a guide. Course topics include hazards associated with crane assembly and disassembly, types of cranes, lifting concepts, rigging and wire rope, signaling, employee qualifications and training, and maintenance, repair, and inspection requirements. Students will participate in workshops to reinforce concepts of safe crane operation. Upon course completion students will have the ability to identify the types of cranes and their components and attachments, determine safe operating conditions, and recognize common violations of OSHA Standards. Course sponsored by Mountain West OSHA Educational Center with TrainND serving as a host training organization. Register with Mountain West Education Center at http://medicine.utah.edu/rmcoeh/continuing-education/course-schedule.php Cancellation & Refund Policy: This class requires a minimum of three students. Class will be cancelled one week prior to class start date if minimum has not been met. Please note: A student may cancel or transfer registration at least one (1) business day prior to class start, unless otherwise stated for a specific class. After this time a processing fee equal to 10% of the class cost will be incurred. Eligible refunds will be issued through the same method that payment was made. Payments made by cash will have eligible refunds issued by check. Standard check processing make take up to 3 weeks.  No refunds or transfers will be issued if TrainND is notified after class start.  

Start date: 08/14/17

End date: 08/16/17

Weekly - Mon, Tue, Wed 8:00 AM - 4:30 PM (8/14/2017-8/16/2017)

Days of the Week : Weekly - Mon, Tue, Wed .

Location : Workforce Training Centre-TrainND NW Location : 
  Workforce Training Centre-TrainND NW.

Room :  Not Assigned

Tuition: $650.00

20 Seats Left

Call 701-572-2835 to register


View Details »
Training is designed to familiarize workers with OSHA standards and educate them on how to recognize, avoid, abate, and prevent safety and health hazards in the workplace. Topics include: an Introduction to OSHA Standards, walking and working surfaces, fall protection, PPE, exit routes, emergency action plans, fire protection, and more. Course duration for OSHA 10-Hour General Industry is 10.5 hours, courses run 1pm-5pm day one and 9am-4:30pm day two. Students may choose to receive a H2S/Respiratory Protection Awareness certification by attending an additional hour of training between 8am-9am on day two of the course.   Please note: A student may cancel or transfer registration at least one (1) business day prior to class start, unless otherwise stated for a specific class. After this time a processing fee equal to 10% of the class cost will be incurred. Eligible refunds will be issued through the same method that payment was made. Payments made by cash will have eligible refunds issued by check. Standard check processing make take up to 3 weeks.  No refunds or transfers will be issued if TrainND is notified after class start.

Start date: 08/30/17

End date: 08/31/17

Weekly - Wed 8:00 AM - 4:30 PM (8/30/2017-8/30/2017); Weekly - Thu 8:00 AM - 12:00 PM (8/31/2017-8/31/2017)

Days of the Week :Multiple Days of the Week :
  Weekly - Wed .  
  Weekly - Thu .  

Location : Workforce Training Centre-TrainND NW Location : 
  Workforce Training Centre-TrainND NW.

Room :  Not Assigned

Tuition: $250.00

40 Seats Left



View Details »
OSHA 511 – Occupational Safety & Health Standards for General Industry This course covers the OSHA regulations, procedures and OSHA511 Occupational Safety and Health Standards for General Industry, as well as general industry safety and health principles. Students will be spending time going through OSHA standards and learning how to look up and work with OSHA standards. Students will conclude the class with a test on their knowledge and familiarity of general industry OSHA standards. This class is a prerequisite to the OSHA 501 Trainer Course. Course sponsored by Mountain West OSHA Education Center with TrainND serving as a host organization. Register with Mountain West Education Center at http://medicine.utah.edu/rmcoeh/continuing-education/course-schedule.php Cancellation & Refund Policy: This class requires a minimum of three students. Class will be cancelled one week prior to class start date if minimum has not been met.   Please note: A student may cancel or transfer registration at least one (1) business day prior to class start, unless otherwise stated for a specific class. After this time a processing fee equal to 10% of the class cost will be incurred. Eligible refunds will be issued through the same method that payment was made. Payments made by cash will have eligible refunds issued by check. Standard check processing make take up to 3 weeks.  No refunds or transfers will be issued if TrainND is notified after class start.

Start date: 09/12/17

End date: 09/15/17

Weekly - Tue, Wed, Thu 8:00 AM - 4:30 PM (9/12/2017-9/14/2017); Weekly - Fri 8:00 AM - 12:00 PM (9/15/2017-9/15/2017)

Days of the Week :Multiple Days of the Week :
  Weekly - Tue, Wed, Thu .  
  Weekly - Fri .  

Location : Workforce Training Centre-TrainND NW Location : 
  Workforce Training Centre-TrainND NW.

Room :  Not Assigned

Tuition: $795.00

15 Seats Left

Please read: *This class is part of the Certificate of ...More

Call 435-725-7110 to register


View Details »
  This course is designed for individuals interested in teaching the 10- and 30-hour construction safety and health Outreach Training Program to their employees and other interested groups. Using OSHA Construction Standards as a guide, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous. Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program, to conduct both 10- and 30-hour Construction Outreach classes, and to issue cards to participants after verifying course completion. Students who wish to participate as authorized Outreach trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA Construction Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course. Prerequisites: Students must successfully complete the OSHA #510 Occupational Safety and Health Standards for Construction and have five (5) years of safety and health work experience in the construction industry. A degree in occupational safety and health, a Certified Safety Professional (CSP) or a Certified Industrial Hygienist (CIH) designation may be substituted for two (2) years of work related experience. Students should obtain guidance on whether they meet this requirement from the OSHA Training Institute Education Center where they intend to receive the training. Authorized OSHA Outreach Training Program trainers are required to attend OSHA #502 Update for Construction Industry Outreach Trainers at least once every four (4) years to maintain their trainer status. Course sponsored by Mountain West OSHA Education Center with TrainND serving as a host organization. Register with Mountain West Education Center at http://medicine.utah.edu/rmcoeh/continuing-education/course-schedule.php  

Start date: 09/18/17

End date: 09/21/17

Weekly - Mon, Tue, Wed, Thu 8:00 AM - 4:30 PM (9/18/2017-9/21/2017)

Days of the Week : Weekly - Mon, Tue, Wed, Thu .

Location : Workforce Training Centre-TrainND NW Location : 
  Workforce Training Centre-TrainND NW.

Room :  Not Assigned

Tuition: $795.00

12 Seats Left

Call 701-572-2835 to register


View Details »
Training is designed to familiarize workers with OSHA standards and educate them on how to recognize, avoid, abate, and prevent safety and health hazards in the workplace. Topics include: an Introduction to OSHA Standards, walking and working surfaces, fall protection, PPE, exit routes, emergency action plans, fire protection, and more. Course duration for OSHA 10-Hour General Industry is 10.5 hours, courses run 1pm-5pm day one and 9am-4:30pm day two. Students may choose to receive a H2S/Respiratory Protection Awareness certification by attending an additional hour of training between 8am-9am on day two of the course.   Please note: A student may cancel or transfer registration at least one (1) business day prior to class start, unless otherwise stated for a specific class. After this time a processing fee equal to 10% of the class cost will be incurred. Eligible refunds will be issued through the same method that payment was made. Payments made by cash will have eligible refunds issued by check. Standard check processing make take up to 3 weeks.  No refunds or transfers will be issued if TrainND is notified after class start.

Start date: 09/27/17

End date: 09/28/17

Weekly - Wed 8:00 AM - 4:30 PM (9/27/2017-9/27/2017); Weekly - Thu 8:00 AM - 12:00 PM (9/28/2017-9/28/2017)

Days of the Week :Multiple Days of the Week :
  Weekly - Wed .  
  Weekly - Thu .  

Location : Workforce Training Centre-TrainND NW Location : 
  Workforce Training Centre-TrainND NW.

Room :  Not Assigned

Tuition: $250.00

40 Seats Left



View Details »
Course sponsored by Mountain West OSHA Education Center with TrainND serving as a host organization. This class is designed to enable students to recognize, evaluate, prevent, and abate safety and health hazards associated with confined space entry. This course features workshops on permit entry classification and program evaluation. Topics include: Recognition of confined space hazards, basic information/instrumentation used to evaluate atmospheric hazards, ventilation techniques, permit systems, and more. Register with Mountain West Educational Center at http://medicine.utah.edu/rmcoeh/continuing-education/course-schedule.php Cancellation & Refund Policy: This class requires a minimum of three students. Class will be cancelled one week prior to class start date if minimum has not been met. Please note: A student may cancel or transfer registration at least one (1) business day prior to class start, unless otherwise stated for a specific class. After this time a processing fee equal to 10% of the class cost will be incurred. Eligible refunds will be issued through the same method that payment was made. Payments made by cash will have eligible refunds issued by check. Standard check processing make take up to 3 weeks.  No refunds or transfers will be issued if TrainND is notified after class start.  

Start date: 11/07/17

End date: 11/09/17

Weekly - Tue 1:00 PM - 5:00 PM (11/7/2017-11/7/2017); Weekly - Wed, Thu 8:00 AM - 4:30 PM (11/8/2017-11/9/2017)

Days of the Week :Multiple Days of the Week :
  Weekly - Tue .  
  Weekly - Wed, Thu .  

Location : Workforce Training Centre-TrainND NW Location : 
  Workforce Training Centre-TrainND NW.

Room :  Not Assigned

Tuition: $650.00

20 Seats Left

Please read: *This class is part of the Certificate of ...More

Call 701-572-2835 to register


View Details »